Morgan’s insight was specific: in a burning room, the hottest air and the heaviest concentrations of smoke and combustion gases were at the highest points, while air near the floor was relatively cooler and cleaner. Carbon monoxide, being slightly lighter than air, tended to rise; particulate smoke also rose with the heat convection. Near the floor, the air was not clean, but it was better.
A breathing device that drew air from near the floor level could therefore provide the wearer with air that was more breathable than the air at head height. Morgan designed a hood that covered the entire head and included a long intake tube that hung down toward the floor or could be extended through an opening to outside air. Inside the hood, a wet sponge helped filter particulate matter. The exhaled air exited through a separate valve. Later versions incorporated an airbag that could hold approximately fifteen minutes of fresh air, allowing the wearer to operate in environments where even floor-level air was inadequate.
He received two patents for the device: U.S. Patent No. 1,090,936 and U.S. Patent No. 1,113,675, both issued in 1914. The patents described a “breathing device” rather than a gas mask — the specific chemical filtering capability that later gas masks would provide was not part of Morgan’s design. His hood addressed smoke and oxygen-deficient environments; it was not protective against chemical warfare agents, which operated by different mechanisms and would require different countermeasures.
The device won first prize at the Second International Exposition of Safety and Sanitation in New York City in 1914. The International Association of Fire Chiefs awarded it a gold medal. The practical advantages were real: it was lightweight, left the hands and feet free, and could be put on and removed quickly. Fire departments began ordering them.
